今天要和大家探討的是真空碳氫清洗機是否可以清洗金屬波紋管，不熟悉它的人可能想象不出來波紋管的樣子，熟悉的人一聽到“波紋管”三個字，立馬能在腦海里浮現出它的外型。是的，沒錯，你可以把它往彈簧的方向想象，市面上常見的金屬波紋管有以下材質：鋁制、304不銹鋼、碳鋼等。波紋管在自動化智能制造業、機械行業、電力工業、交通運輸等行業應用廣泛，因此，人們對它的需求量也非常大，因此，相關廠家也會大批量生產各式各樣的金屬波紋管。

　　Today, we will discuss whether vacuum hydrocarbon cleaning machines can clean metal bellows. Those who are not familiar with it may not be able to imagine what a bellows looks like, but those who are familiar with it can instantly visualize its appearance upon hearing the word "bellows". Yes, that's right, you can think of it in the direction of a spring. Commonly seen metal bellows on the market are made of aluminum, 304 stainless steel, carbon steel, etc. Bellows are widely used in automated intelligent manufacturing, machinery industry, power industry, transportation, and other industries. Therefore, there is a high demand for them, and relevant manufacturers also produce a wide range of metal bellows in large quantities.

　　波紋管有尺寸較大的，也有尺寸較小的。體積比較大的那種波紋管就不適合拿設備洗，我們就來講常見的中小型尺寸的波紋管吧。波紋管的外形跟彈簧相似，但彈簧有縫隙，波紋管沒有，生產出來的波紋管表面不可能是一塵不染的，往往會有一層沖壓油脂、拉伸油脂等附著在其表面上，這些油脂也混合了礦物油以及防銹油等。剛生產出來，用指腹去觸摸表面，手指會油膩膩的，根本無法正常使用，因此，就要用到工業清洗。可以選擇的超聲波清洗設備是真空碳氫清洗機，其除油除污特點是業界公認的——潔凈度達標！真空碳氫清洗設備是工業用的超聲波清洗機，最近幾年較為流行，因為其環保、潔凈度高、清洗高效等特點，上至千人工廠，下至幾十人工廠，都要采購一臺放到車間使用。碳氫真空清洗機開機預熱后，油污較輕的波紋管清洗時間一般是3分鐘，如果油污稍微重一點，就可以將清洗時間設置成5分鐘，烘干后，再去抽查潔凈度，合格率為99.999%。

　　Corrugated tubes come in various sizes, ranging from large to small. The larger ones are not suitable for washing with equipment, so let's focus on the common small and medium-sized corrugated tubes. The appearance of corrugated tubes resembles that of springs, but unlike springs which have gaps, corrugated tubes do not. The surface of the produced corrugated tubes cannot be completely spotless, often with a layer of stamping grease, stretching grease, etc. attached to it. These greases also contain mineral oil and rust preventive oil. When touched with the fingertips just after production, the fingers will feel greasy, making it impossible to use normally. Therefore, industrial cleaning is necessary. An optional ultrasonic cleaning device is the vacuum hydrocarbon cleaning machine, which is widely recognized in the industry for its oil and dirt removal capabilities - achieving high cleanliness standards! Vacuum hydrocarbon cleaning machines are ultrasonic cleaning machines for industrial use, and have become popular in recent years due to their environmental friendliness, high cleanliness, and efficient cleaning. Factories ranging from those with thousands of employees to those with just a few dozen all procure one for use in their workshops. After the hydrocarbon vacuum cleaning machine is preheated, the cleaning time for corrugated tubes with lighter oil stains is generally 3 minutes. If the oil stains are slightly heavier, the cleaning time can be set to 5 minutes. After drying, a spot check on cleanliness is conducted, with a pass rate of 99.999%.

　　金屬波紋管的產量一般很大，所以四個槽體的真空碳氫清洗機是比較適合大部分工廠使用的，用我們行業內的話就叫四工位超聲波碳氫清洗設備，因為每個工位的功能都不一樣。1號工位（清洗槽）是碳氫溶劑+超聲波粗清洗，2號工位（清洗槽）是碳氫溶劑+超聲波精清洗，3號工位是用市水鼓泡漂洗，最后是熱風烘干。前面兩個工位我們都提到了碳氫清洗劑+超聲波清洗，其實也是我們常說的，振子的電能轉化為機械能，通過機械震動的沖擊力震落附著在波紋管表面的油脂，在碳氫清洗劑的輔助作用下，徹底溶解工件表面的油脂。真空碳氫清洗機是一臺全自動智能清洗設備，只要一個人操作即可，如果物料多，可適當增人上下料，但基本上都只要一個人操作就可以，因此，省下來的人工成本非常可觀！

　　The output of metal bellows is generally large, so the vacuum hydrocarbon cleaning machine with four tanks is suitable for most factories. In our industry, it is called a four-station ultrasonic hydrocarbon cleaning equipment because each station has a different function. Station 1 (cleaning tank) is for hydrocarbon solvent + ultrasonic rough cleaning, Station 2 (cleaning tank) is for hydrocarbon solvent + ultrasonic fine cleaning, Station 3 is for bubbling rinsing with tap water, and finally, hot air drying. We mentioned hydrocarbon cleaning agent + ultrasonic cleaning for the first two stations. In fact, as we often say, the electrical energy of the transducer is converted into mechanical energy, and the impact force of mechanical vibration shakes off the grease attached to the surface of the bellows. With the assistance of the hydrocarbon cleaning agent, the grease on the surface of the workpiece is completely dissolved. The vacuum hydrocarbon cleaning machine is a fully automatic intelligent cleaning equipment that can be operated by one person. If there are many materials, additional personnel can be added for loading and unloading, but basically, only one person is needed for operation. Therefore, the labor cost saved is very considerable!

　　本文由 碳氫清洗機  友情奉獻.更多有關的知識請點擊  http://m.chinalssc.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is kindly contributed by Carbon Hydro Cleaning Machine. For more relevant knowledge, please visit http://m.chinalssc.com/ with a sincere attitude. We will provide you with comprehensive services and will continue to share more relevant knowledge with you Stay tuned